top of page

HAYARMI DWC-LLC
Your Partner in the world of INDUSTRIAL AUTOMATION.
Official distribution partner for the Middle East, Africa, Asia & Oceania
WECON Plc
Platform-type PLC

WECON's top-tier controller platform, with the hardware and the programming environment both developed in-house. Rack-based with slice expansion along the backplane, for larger machines and lines that need more I/O and processing than a compact PLC can carry.
Medium-size PLC

High-performance mid-range controllers. The AC60 runs on the CODESYS® platform with full PLCopen support; the LX6V and LX6S are modular EtherCAT® controllers programmed in IEC 61131-3. All three take up to 32 local expansion modules and share the same I/O range.
Small-size PLC

Compact controllers with motion control built in, high-frequency pulse handling and fast response for precise positioning with stepper and servo motors. Point counts from 8/6 up to 36/24, with relay, transistor or mixed output.
LX6/AC expansion module

Expansion for the LX6V, LX6S, AC60 and A500 controllers, up to 32 modules per base unit. Digital, analog, temperature, weighing and high-speed pulse modules, plus EtherCAT couplers for building a remote station.
LX3V expansion module

Analog, temperature, weighing and pulse expansion for the compact LX3V range, with several modules connectable to one base unit. Analog input resolves to 16 bits, analog output to 12 bits, weighing to 24 bits.
LX3V BD module

Board-level add-ons that fit inside an LX3V PLC to add analog channels, temperature inputs or a communication port without taking an expansion slot or widening the panel footprint. Apart from the communication boards, all are also compatible with LX5V PLCs.
LX5V BD module

The same board-level approach for the LX5V range, fitted inside the controller's own housing. All LX5V BD modules are compatible with LX3V PLCs as well.
Modbus Remote IO

Distributed I/O for any controller that speaks Modbus RTU over RS485 — not just WECON. Station number and baud rate are set with DIP switches on the unit, so a node can be added and addressed without a configuration tool.
bottom of page